Bear Upgrade Extruder Parts

€16.63

High-quality plastic parts (PETG) and hardware needed to build Bear extruder.
Bear upgrade designed by Grégoire Saunier
Assembly guide

Quantity
There are not enough products in stock


Plastic parts:

 extruder body (PETG; black) - 1pcs
· extruder cover (PETG; black) - 1pcs
· extruder idler (PETG; black) - 1pcs
· x carriage (PETG; black) - 1pcs
· x carriage back (PETG; black) - 2pcs
· cable guide back (PETG; black) - 2pcs
· filament sensor cover (PETG; black) - 1pcs
· filament sensor lever (PETG; black) - 1pcs
· fan shroud (ABS; black) - 1pcs

Hardware:

· m2x8mm screw DIN912 (12.9; black) - 1pcs
· m3x10mm screw DIN912 (12.9; black) - 4pcs
· m3x14mm screw DIN912 (12.9; black) - 4pcs [used for Noctua]
· m3x16mm screw DIN7380 (10.9; black) - 4pcs [used for Sunon]
· m3x18mm screw DIN912 (12.9; black) - 2pcs
· m3x25mm screw DIN912 (12.9; black) - 2pcs
· m3x40mm screw DIN912 (12.9; black) - 5pcs
· m3 hex nut DIN934 (8.8; black) - 5pcs
· m3 nylock nut DIN985 (8.8; black) - 2pcs
· m3 square nut DIN562 (steel/ZN; bright) - 4pcs
· m3 washer DIN125 (8.8; black) - 4pcs
· m3 washer DIN125 (nylon; transparent) - 1pcs
· extruder spring DIN2076-B (5x15mm) - 1pcs
· ziptie (nylon; black) - 1pcs
· PTFE tube (50mm) - 1pcs

PLP-BEAR-EXTR