Voron V2.4 Hardware Kit (Black)

€46.72

Partial hardware kit for Voron V2.4
NB! Hammer head M3, HNTAJ5-3 and HNTAJ5-5 t-nuts are not included in the following kit

Quantity
There are not enough products in stock


Screws
  · DIN912 M5x40 screw (12.9 hardened steel) - 25pcs
  · ISO 7380-1 M5x30 screw (10.9 hardened steel) - 22pcs
  · ISO 7380-1 M5x16 screw (10.9 hardened steel) - 35pcs
  · ISO 7380-1 M5x10 screw (10.9 hardened steel) - 40pcs
  · ISO 7380-1 M4x6 screw (10.9 hardened steel) - 4pcs
  · DIN912 M3x40 screw (12.9 hardened steel) - 30pcs
  · DIN912 M3x30 screw (12.9 hardened steel) - 32pcs
  · DIN912 M3x20 screw (12.9 hardened steel) - 29pcs
  · DIN912 M3x16 screw (12.9 hardened steel) - 20pcs
  · DIN912 M3x12 screw (12.9 hardened steel) - 41pcs
  · DIN912 M3x8 screw (12.9 hardened steel) - 217pcs
  · ISO 7380-1 M3x6 screw (10.9 hardened steel) - 12pcs
  · ISO 10642 M3x6 screw (10.9 hardened steel) - 8pcs
  · ISO 10642 M3x10 screw (10.9 hardened steel) - 4pcs
  · Self tapping screw M2x10 (blackened steel) - 16pcs

Spacers and nuts
  · DIN934 M3 nut (8.8 low carbon boron steel) - 7pcs
  · DIN934 M5 nut (8.8 low carbon boron steel) - 26pcs
  · Threaded inserts (M3x5x4) - 110pcs
  · Shim ring (5x10x1.0mm) - 42pcs
  · DIN466 M4 knurled nut (blackened steel) - 4pcs
  · DIN125 M3 washer (8.8 low carbon boron steel) - 3pcs

Spares
  · DIN988 Shim ring (5x10x1.0mm) - 5pcs
  · DIN934 M5 nut (8.8 low carbon boron steel) - 4pcs
  · Threaded insert M3x4x5 (brass) - 5pcs
  · DIN912 M5x40 screw (12.9 hardened steel) - 2pcs
  · ISO 7380-1 M4x6 screw (10.9 hardened steel) - 4pcs
  · ISO 7380-1 M5x30 screw (10.9 hardened steel) - 2pcs
  · ISO 7380-1 M5x16 screw (10.9 hardened steel) - 2pcs
  · ISO 7380-1 M5x10 screw (10.9 hardened steel) - 4pcs
  · DIN912 M3x40 screw (12.9 hardened steel) - 2pcs
  · DIN912 M3x30 screw (12.9 hardened steel) - 2pcs
  · DIN912 M3x20 screw (12.9 hardened steel) - 2pcs
  · DIN912 M3x12 screw (12.9 hardened steel) - 2pcs
  · DIN912 M3x8 screw (12.9 hardened steel) - 5pcs
  · Self tapping screw M2x10 (blacked steel) - 5pcs

Tools
  · DIN911 Hex key h1.5 - 1pcs
  · DIN911 Hex key h2.0 - 1pcs
  · DIN911 Hex key h3.0 - 1pcs
  · DIN911 Hex key h4.0 - 1pcs

Additionally V2.4 build will require following parts:
  · Hammer head M3 T-nut - 47pcs
  · HNTAJ5-3 nut - 120pcs
  · HNTAJ5-5 nut - 61pcs

NB! This t-nuts are not included in the Hardware kit

Lecktor
VRN-24-HRDWR-KIT-BLK