Z joints (ABS GF)
€13.25
Z joints (8pcs) for Voron V2.4
· Source models:
· z_joint_upper_x4.stl
· z_joint_lower_x4.stl
· Material: Phaetus aeWorthy™ ABS-GF
Print settings:
· Perimeters: 5
· Top/Bottom layers: 5
· Infill (pattern): 40% (Gyroid)
· Print temperature: 270°C
Material parameters:
· Base polymer: ABS (Acrylonitrile Butadiene Styrene)
· Composite: Glass Fibre 10%
· VST (Vicat Softening Temperature): 105°C
· Manufacturer: Phaetus
Proudly manufactured in Estonia
by Lecktor Technologies OÜ
4 other products in the same category:
Z joints (8pcs) for Voron V2.4
· Source models:
· z_joint_upper_x4.stl
· z_joint_lower_x4.stl
· Material: Phaetus aeWorthy™ ABS-GF