Mechanical end-stop
€1.45
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage has reached its minimum or maximum. Excellent if you do not want to get bogged down in complicated light beam interrupters or flags.
Features Benefits: Quality switching elements. Customized high quality connection, using 22AWG wire, copper wire inside is very thick, can be resistant to current 2A, 300V voltage. An insulating layer over a wide range of temperatures, up to 80 degrees. Is the common connection of thin copper wire can not match. Not easy to pull off, plug it convenient, for ease of use, plug the other side to do the one, you can use the direct plug.
Connection description:
1) Red line connecting VCC (ramps of +)
2) Connect the black wire GND (ramps of -)
3) Green Line connection SIGNAL (ramps in s)
Tips: Under normal circumstances, the system must be configured to at least three mechanical switches.
Pros: Easy to install, the more common styles.
Package Include 1PCS x mechanical switch 1PCS x Cable 3-pin 70CM
ELE-MECH-END-STP
You might also like
4 other products in the same category:
![[EOL] Hall Effect XY...](https://lecktor.com/3166-home_default/hall-effect-xy-endstop-pcb.jpg)
![[EOL] Microswitch endstop...](https://lecktor.com/1681-home_default/microswitch-endstop-module.jpg)
These mechanical end stops are quiet simply a means to an end. They detect when an x/y/z stage has reached its minimum or maximum. Excellent if you do not want to get bogged down in complicated light beam interrupters or flags.