Z joint upper hall effect (ABS GF)
1,45 €
Z joint upper hall effect (1pcs) for Voron V2.4
· Source model:
· z_joint_upper_hall_effect.stl
· Material: Phaetus aeWorthy™ ABS-GF
Print settings:
· Perimeters: 5
· Top/Bottom layers: 5
· Infill (pattern): 40% (Gyroid)
· Print temperature: 270°C
Material parameters:
· Base polymer: ABS (Acrylonitrile Butadiene Styrene)
· Composite: Glass Fibre 10%
· VST (Vicat Softening Temperature): 105°C
· Manufacturer: Phaetus
Proudly manufactured in Estonia
by Lecktor Technologies OÜ
Samas kategoorias on veel 4 toodet :
Z joint upper hall effect (1pcs) for Voron V2.4
· Source model:
· z_joint_upper_hall_effect.stl
· Material: Phaetus aeWorthy™ ABS-GF